Quick Answer: How Long Do I Wait To Add Algaecide After Shock?

Can you add shock after algaecide?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together.

This is because when you mix chlorine and algaecide together, it renders both of them useless.

Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM..

How long after adding stabilizer can I add shock?

8) How long after adding chemicals can I swim? Alkalinity Balance, pH up, pH down, Calcium Balance, Water Stabilizer, and clarifier are all swim-safe chemicals. Wait about 20 minutes, and you are free to swim. We suggest adding algaecide, Super Erace, and shock at night, after everyone is out of the pool.

Is shock and stabilizer the same thing?

Also known as pool conditioner, chlorine pool stabilizer, or chlorine stabilizer you can buy this chemical additive as either liquid or granules. It’s also often called cyanuric acid, a chemical that may be included in chlorine tablets or sticks (called trichlor) or shock (called dichlor).

Does shock raise pH?

Chlorine based pool shock (Calcium Hypochlorite) has a high pH, and will naturally raise the pH level of your swimming pool water, in addition to changing your chlorine level. Chlorine free shock has a neutral pH, and will not affect any of your pool chemical levels.

Can I add stabilizer and shock at the same time?

You can even get it mixed in with chlorine tablets or sticks, called trichlor, and in chlorine shock, called dichlor. These combination products are referred to as stabilized chlorine because the stabilizer is mixed right in with the sanitizer, saving you the trouble of measuring and adding them separately.

Can you add shock and pH down at the same time?

Using liquid chlorine raises the pH of the water. Liquid chlorine does not raise pH. … Chlorine shock + Sequester Agent: Chlorine shock will also disrupt stain & scale chemicals, aka chelators or sequestering agents, if added at the same time.

Why is my pool cloudy after adding shock?

FILTER OR PUMP PROBLEMS: If your pool is cloudy immediately after shocking, it’s not a problem with your pump or filter, but if your circulation is poor, or the filter is dirty or clogs up quickly, or if the pump doesn’t run long enough each day – all of these can create a problem with hazy pool water.

How long does it take for algaecide to dissipate?

2-4 hoursAll forms of chlorine turn in hypochlorus acid when mixed with water. The chemical reaction can cause irritated skin or eyes. Normally it take 2-4 hours for everything to balance out and be safe to swim in.

Can you add pool shock and clarifier at the same time?

Never allow pool chemicals to contact each other, even a drop of algaecide, clarifier, antifreeze, or other liquids mixed with chlorine, can erupt into a raging fire. Mixing chlorine and acid (pH down) creates a deadly gas. Mixing different chlorine types can explode when moisture is added.

How long after adding pH up can you add shock?

After Adding pH, Alkalinity and Clarifier It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals.

Why is my algaecide foaming?

What causes pool foam? It can also be caused by either too much algaecide or other cheap chemicals that tend to have additives. Either way, all this gunk makes your water thick and the air from the pool jets adds volume to it, causing bubbles.

Will algaecide clear a green pool?

If you are using Algaecide, just know it will not clear a green pool. It is more effective as a preventative measure than as a treatment to kill algae. Use algaecide regularly once your pool is clear again to make sure you do not have another algae bloom.

Can I add shock and chlorine at the same time?

Yes, you can add both shock and chlorine to a pool. However, you should not add them at the same time. The best thing to do is to shock your pool first. Then, once the chlorine levels go down to a certain threshold, you can add more chlorine.

Can you shock a pool two days in a row?

Will the children swim again? Here’s the deal. It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

What happens if you put too much shock in a pool?

Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.

How long after putting shock in pool can I add clarifier?

about 20 minutesHow long after putting shock in pool can I add clarifier? 8) How long after adding chemicals can I swim? Alkalinity Balance, pH up, pH down, Calcium Balance, Water Stabilizer, and clarifier are all swim-safe chemicals. Wait about 20 minutes, and you are free to swim.

Why is my pool still green after shock and algaecide?

When pool chemicals are not properly maintained it is easy for pH levels to get out of whack quickly leading to a green pool. If you have already shocked your pool and taken pH level samples you may still need to add stabilizers or phosphate removers.